Salmue Cotton Bed Canopy+Steel Ring+Hooks +Hook Base Plates +Adhesive Tapes+Screws Block Out Light Dome Princess Mosquito Net Equip With Assembly Tools(Khaki)

£9.9
FREE Shipping

Salmue Cotton Bed Canopy+Steel Ring+Hooks +Hook Base Plates +Adhesive Tapes+Screws Block Out Light Dome Princess Mosquito Net Equip With Assembly Tools(Khaki)

Salmue Cotton Bed Canopy+Steel Ring+Hooks +Hook Base Plates +Adhesive Tapes+Screws Block Out Light Dome Princess Mosquito Net Equip With Assembly Tools(Khaki)

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

The finish of the rails may be important from an aesthetic point of view and also for the grip surface it provides. An epoxy, paint or plastic finish provides a warmer feel to rails, is hard wearing and will reduce the effects of condensation. A choice of colour allows for a colour contrast with the wall for users with low vision or for co-ordination of bathroom accessories. When stood in the bath - A rail (at least 500mm long) can be fixed vertically on the wall, 600mm from the tap end of the bath (dimension b in above diagram), with its lower end 200mm above the bath rim (COT 2006 p13, H M Government 2015, p58, diagram 26). This is most likely to be of use when stood in the bath (perhaps whilst showering) or when standing from a bathboard over the bath. If there are obstructions beside the toilet, such as a radiator, or the walls are not suitable for installing rails, you will need to look at alternative kinds of support. These fix to the wall behind the taps and rest on the bath rims. When sitting in the bath, the rail will be directly in front of the person at about chest height. In this position it will provide stability whilst in the bath. The rail should only have downward pressure applied so the weight is taken by the bath rim, it is not designed for the user to pull on to sit down or stand up from the base of the bath (Pain et al 2003).

When standing from a sitting position in the bath you may find it helpful to hold one horizontal wall-fixed grab rail (placed above the bath) with one hand and use the outer rim of the bath with the other hand to push against. There needs to be a 50-60mm clearance between the wall and all handrails. The Arena adjustable bed grab rail, handle, ring or bed lever (depending on what you call it) has not got a triping hazard like the parnell premier grab rail, it also comes with anti entrapment and was designed by Laybrook especially for domestic electric adjustable beds. The Arena grab ring is attached to the side of the surround so it stays static when you change position on your bed, this makes it easy to use when getting in and out of bed, helps you turn whilst laying in bed, supports you when getting up out of the bed whilst sitting on the edge. With other grab rings, when the head section of your bed elevates to the upright position the grab ring moves with the bed and impedes you from getting in & out of the bed. Some hinged wall-mounted rails can be supplied with a support leg which rests down on the floor when the rail is horizontal, transferring some of the load from the wall to the floor. These provide a horizontal bar in their lowered position. They should be fitted at waist/elbow level and approximately a fist width away from your thigh when sat on the toilet. If you have underfloor heating, or if you have a sealed/waterproof floor, such as in a wetroom, you should avoid fixing rails into the floor. You must also consider where any services, such as water/drainage pipes and electricity cables run inside the walls or under the floor.

Choose Your Adjustable Bed By Size

This should be a flat, unknotted piece of wood, which is screwed into the vertical joining pieces of the partitions. The grab rails can then be attached to the board. The College of Occupational Therapists recommends a 144mm x 19mm board/pattress with its external corners well rounded and the board itself fixed to the wall at least every 900mm (COT 2006). THIS BED LEVER FITS ALL TYPES OF SLATTED DIVAN ADJUSTABLE BEDS FROM ALL COMPANIES AND 95% OF ALL OTHER LAYBROOK ADJUSTABLE BEDS, ALL LAYBROOK WOODEN ADJUSTABLE BED (NEEDS A DIFFERENT BOTTOM PLATE), ALL LAYBROOK LEATHER ADJUSTABLE BEDS. The lower portion is usually set horizontally and acts as a forearm support. This enables the user's body weight to be distributed through his or her forearm which may be helpful for someone with painful hands or wrists. If you are very unstable when standing and you find it difficult to bear your own weight, simple grab rails may not be the most suitable answer for you. You may need more support to help you. Likewise, if you have very poor grip, or significant pain in your hands, arms or shoulders.

It is recommended that it is run continuously from the bottom to the top of your flight of stairs, including going around the edge of any intervening landings and across window openings. The handrail should be allowed to continue past the top and bottom steps by 300mm. Ensure that the wall is strong enough to take the weight of this type of rail. Care should be taken that the user never bends down underneath the rail (e.g. to reach their feet) when sat in the bath as they could trap their head under the rail.Rails set at an angle can help a person who needs a steadying support - e.g. to stand from a bath board to shower. The rail can be placed at an angle of 45 degrees up and away from the user. This keeps the wrist in a neutral position. It is not necessary to lean far forward to grasp the rail at the lower end and the hand can travel up the rail to maintain the support once the person is standing. The height will depend on your needs, often at the same height as an existing banister rail. This is usually between 900-1000mm above the pitch line of the stairs. Some have a support leg which rests down on the floor when the rail is horizontal. Some models provide a single horizontal rail which provides support at one height; others consist of a looped rail which provides two alternative gripping positions. Some of these rails have a built-in toilet roll holder.

They are fixed to the wall or to the floor behind the toilet and can fold down to a horizontal position alongside the toilet. Using one rail: The rail is fitted starting at a point approximately 25mm forward of your knee and approximately 50-70mm above your elbow (when seated on the toilet with your arms down against your side), at an angle running at 45 degrees forwards and upwards away from you. This may help you to support the weight of your arm whilst pulling with your hand higher up the rail. See above diagram.sitting down or standing up from the toilet, or standing to manage your clothes when using a toilet There are many types of grab rail. The main types are briefly introduced below, before going into greater detail about grab rails and their use in specific areas of the home. Floor to ceiling railsare vertical rails which are attached to both the floor and the ceiling. They can be held at any point up the bar for general support and can be useful in the process of standing up/sitting down.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop